Studio321_FAQ

Studio 321 Frequently Asked Questions

General Studio 321 Questions
3D Printer Questions
Cricut Maker Questions
Glowforge Questions

---

General Studio 321 Questions

When can I use the space?
During open studio hours.

Does it cost anything to use the space?
No! All materials are free, and are available while supplies last.

Where do materials come from?
The makerspace has a small budget provided by the city of Waukesha that is used to purchase consumables like Perler beads, glue, Crayons, etc. We also accept most craft supply donations from the public.

Can I donate to the space?
Yes! Please bring in any gently used craft supplies or tools and the makerspace staff will decide if they can be used in the space.

Do you have a list of supplies that you need?
Yes, please follow this link for our Amazon wish list or use your phone to scan the QR code on the right side of the page, below the hours listing.

Is there an age restriction in the space?
The makerspace is open to all ages. Any maker that is younger than 11 years old must be supervised by a parent or guardian at all times. If there is an emergency where the parent or guardian needs to leave the room, please consult with the makerspace staff before doing so.

How do I use the makerspace equipment?
There is at least one makerspace staff person in the room at all times to answer any questions about how to use the equipment. Makers must attend training classes before using the 3D printers, the Glowforge and the Cricut Maker. The schedules for the classes are available on the Waukesha Public Library website. You can find them by clicking on the Event Calendar button, typing in Studio 321 in the Keyword Search field and clicking Apply. Or you can follow this link: Event Calendar

How do I make reservations to use the makerspace equipment?
Please contact the Studio 321 Supervisor, Amy Welch, via email at [email protected] or call 262-524-3682 to schedule a reservation. If you are in the makerspace, you can also ask the staff to make a reservation for you.

How do I volunteer in the makerspace?
Please contact the Studio 321 Supervisor, Amy Welch, via email at [email protected] or call 262-524-3682 for details on volunteering.

If I've used a piece of equipment before at another makerspace, school or home, can I use it in Studio 321 without getting trained?
No. All makers must be trained by the makerspace staff in the library where the equipment is being used. Training from another library or experience using the equipment at another location (work, school, etc.) does not take the place of training here.

How much do the (3D printer, Glowforge, Cricut) training classes cost?
Nothing, they are a free service provided by the Waukesha Public Library!

How old do you have to be to participate in the training classes?
Anyone 11 years old or older can take the classes by themselves, anyone under 11 must have an adult take the class with them. When registering for a class, please register each person individually. In order to make sure everyone in the class has time to complete their first project, we need to have an accurate number of participants. Names added to the notes field of another person's registration entry are not considered registered. Each person must be registered to attend and participate in the class.

When is the next class for the 3D printers, the Glowforge or the Cricut Makers?
The schedules for the classes are available on the Waukesha Public Library website. You can find them by clicking on the Event Calendar button, typing in Studio 321 in the Keyword Search field and clicking Apply. Or you can follow this link: Event Calendar. When registering for a class, please register each person individually. In order to make sure everyone in the class has time to complete their first project, we need to have an accurate number of participants. Names added to the notes field of another person's registration entry are not considered registered. Each person must be registered to attend and participate in the class.

3D Printers

Do you charge for filament used in the 3D printers?
There is currently no charge for the filament used in the 3D printers. The maximum print time is 5 hours. If you need to print something that will take longer than 5 hours, please bring in your own filament and have it approved by the makerspace staff.

How long can I print on a 3D printer?
If you are using the filament supplied in the Studio, the maximum print time is 5 hours. If you bring in your own filament, you can print as long as you want, so long as it does not interfere with other classes or programs being held in the Studio. Please consult with the makerspace staff before starting a print that will take longer than 5 hours.

What kind of filament does the Makerspace use?
The Studio only uses PLA (Polylactic Acid) filament and we purchase it from Amazon.com. We use Amolen, Makerbot, Overture and Protopasta brands.

Can I bring in my own filament?
Yes, you can bring your own filament but it should be PLA and must be approved by the makerspace staff before being used.

When is the next training class for the 3D printers?
The schedule for the classes are available on the Waukesha Public Library website. You can find it by clicking on the Event Calendar button, typing in Studio 321 in the Keyword Search field and clicking Apply. Or you can follow this link: Event Calendar. When registering for a class, please register each person individually. In order to make sure everyone in the class has time to complete their first project, we need to have an accurate number of participants. Names added to the notes field of another person's registration entry are not considered registered. Each person must be registered to attend and participate in the class.

Cricut Maker

Do you supply materials to use in the Cricut Maker?
We have some scraps of paper, vinyl and iron-on for small projects but you should bring your own supplies for your projects.

What materials can I use in the Cricut Maker?
You can use any Cricut branded materials that are lableled for use in the Cricut Maker line of machines such as vinyl, iron-on, paper, cardstock, wood veneer, etc. Please consult with the makerspace staff if you are going to be using non Cricut brand materials purchased from other stores.

What materials are not recommended for use in the Cricut?
Please consult with the makerspace staff before starting a project where you will be using your own materials.

When is the next training class for the Cricut?
The schedule for the classes are available on the Waukesha Public Library website. You can find it by clicking on the Event Calendar button, typing in Studio 321 in the Keyword Search field and clicking Apply. Or you can follow this link: Event Calendar. When registering for a class, please register each person individually. In order to make sure everyone in the class has time to complete their first project, we need to have an accurate number of participants. Names added to the notes field of another person's registration entry are not considered registered. Each person must be registered to attend and participate in the class.

Glowforge

Do you supply materials to use in the Glowforge?
We have some scraps of wood and acrylic for small projects but you should bring your own supplies for your projects. All materials that will be used in the Glowforge MUST be approved by the makerspace staff before use.

What materials can I use in the Glowforge?
You can use any unfinished and unpainted wood but you should have a good idea of what kind of wood it is. You can also use cast acrylic. All materials that will be used in the Glowforge MUST be approved by the makerspace staff before use.

What materials are not allowed in the Glowforge?
Please do not use materials containing PVC (Polyvinyl Chloride) as it will release toxic gasses. All materials that will be used in the Glowforge MUST be approved by the makerspace staff before use.

When is the next training class for the Glowforge?
The schedule for the classes are available on the Waukesha Public Library website. You can find it by clicking on the Event Calendar button, typing in Studio 321 in the Keyword Search field and clicking Apply. Or you can follow this link: Event Calendar. When registering for a class, please register each person individually. In order to make sure everyone in the class has time to complete their first project, we need to have an accurate number of participants. Names added to the notes field of another person's registration entry are not considered registered. Each person must be registered to attend and participate in the class.